AMIGA 2000 (Lo-tech 8-bit IDE Adapter) for IDE Hard Drive [PROJECT 2] *NEED...
This is a new thread related to a Amiga 2000 Build Project. I am trying to restore an RLL ALOK Ocaton Drive hooked up to a Western Digital ISA controller. The controller is plugged into the Amiga PC...
View ArticleUSB on A1200?
Hi All, Is there a USB solution for the A1200, just wanted to know, thanks Brad Hansen
View ArticleCF Card workbench
Hi all, I use an CF Card for my Workbench its a 4Gb card, what is the maximum Gb I can use on my Amiga 1200 ? Some have told me the maximum I can use is only 4Gb BUT is that real true? BTW the CF card...
View ArticleAmiga 3000 Kickstarts
Amiga 3000 question for anyone who might know. I have a 3000 motherboard that used to have a ROM tower for the kickstarts, but the tower is long gone. The ROM tower sat in U182/183, but interestingly...
View ArticleLesson for tonight..
try and keep away from FFS filesystems to avoid validation issues.. best to stick with PFS or SFS. note - takes forever to run validation scan with disksalv on a 4GB cf with heaps of directories. :(
View ArticlePlipbox vs. conventional nic's
Okay, this may be a moot point, but how does the plipbox compare to a more "normal" network interface card? I know the plipbox is, obviously, much easier to acquire, but how does the throughput speeds...
View ArticleFastATA 4000
Looking for quick advice. Here is the setup: A4000D Channel 1: 8 Gig CF - 3.1 Workbench et al - works well 4 Gig CF - device recognized via sys info, but not able to be accessed Channel 2: CD Rom -...
View Article68030 50MHz vs. 68040 33MHz
How much difference in performance is there between a 68030 clocked at 50MHZ w/ 12MB RAM compared to a 68040 clocked at 33MHZ with 32MB RAM? In essence compare a RCS Fusion 40 to a GVP 030 Combo board...
View ArticleCF Card Workbench issue
When I plug my CF Card into my SCSI port on my A1200 it doesn't seem to load on my workbench screen. I have to go into System > Devs > Dos Drivers then double click on CFO ( I think that's it) to...
View Articlenew CF HD takes many times to boot up properly?
I recently replaced my old IDE HD in my A4000 (OS3.9, BB 1 & 2) with a CF card as my main boot drive and noticed it takes me approx. 4 to 5 tries at booting with 'recoverable error- press LMB'...
View ArticleInstalling RapidRoad on 1200 with full-sized clock port
The short clock-port header which came with my RapidRoad will not push down on the clock port as all of the pins are present. Does anyone have a way to get this done easily without me having to hack up...
View ArticleCyberStorm official versus private flashes
On the Phase5 website at a1k there are two "private" flashes. I'm going to re-flash my Cyberstorm MK III today as I cannot get the bootmenu to come up and I saw these two private flashes. Has anyone...
View ArticleAmiga External Flicker Fixer on Amiga 4000?
Hi all, Just a quick query. I own an Amiga flicker fixer that use to be sold by Amigakit (http://amigakit.leamancomputing.com/...roducts_id=414). I have tried this on a number of Amiga 4000 computers...
View ArticleHelp with Amiga 1080 monitor
Hi all, Recently picked up an Amiga 1080 monitor. I was about to post something about it that puzzles me, for any. Onitor experts that know the insides, but now I also have to ask a second more...
View ArticleX5000 question
Hi gang! I'm back!!! I have a bit of bad news... my AmigaOne 500 that I waited so long to get and build, was stolen a few months ago while I was at work. And of course, the manufacturer is completely...
View ArticleAmiga 1200 sound issue
I've recently purchased a ACA 1221 Accelerator for my 1200. I have had no issues with it so far until now. The other day I was playing a game and noticed the sound wasnt very clear from one of the...
View ArticleFinally plugged in my GGLabs A520HD
Picked up a GGLabs A520HD a while back but only just got around plugging it in to an A600 and a 2013 Panasonic Viera plasma. Here's a quick pic of SuperHiresInterlaced. There's not even the slightest...
View Article1200 PCMCIA not working with CF
Hi, I have 2 Amiga 1200s. One the Amigakit easyadf pcmcia works perfectly in and the other 1200 it does not show the drive. I reinstalled workbench on it fresh and reinstalled the ADAPCMCFL PCMCIA...
View ArticleClik here to view.
SCSI2SD a3000 1GB only?
I got a scsci2sd 5.0b with a 8GB Sandisk microsd it came with in my Amiga 3000. The drive reads in and shows two 1GB partitions available (pics) on Kickstart 3.1 and WB 3.1. I expected two 4gb drives...
View Article